FILTER CARTRIDGES

P Series Spun Bonded Polypropylene Cartridges

• Manufactured from pure 100% polypropylene Fibers
• Designed for purity and chemical compatibility
• Spun Fibers form a true gradient density from outer to inner surfaces

PD Series Polydepth® Polypropylene Sediment Cartridges

• Quality polypropylene filter media
• Will not impart taste, odour or colour
• Superior chemical Resistance
• Compatible with wide range of Industrial Filtration
• Available in wide range of micron ratings & lengths

DGD Series - Dual-Gradient Density Cartridges

• Manufactured from pure 100% polypropylene
• Designed for purity, bacteria and chemical compatibility
• Two separate gradient density layers enhance cartridge performance
• Three-times the dirt-holding capacity of similar-sized sediment cartridges

S1 Series Pleated Cellulose Cartridge

• Pleated design maximizes dirt-holding capacity
• Designed for general water filtration purposes
• Recommended for chlorinated water supplies
• Economically priced
• Nominal 20-micron rating

ECP Series Pleated Celluose Polyester Cartridges

• Replaces CP & HFCP Series Cartridges
• Special formalution of resin-impregnated cellulose & polyester fibers
• Provides hgiher wet strength than regular cellulose cartridges
• Minimal unloading & media migration

R Series Pleated Polyester Cartridges

• Pleated design maximizes dirt-holding capacity
• Versatile and reusable, allow for a variety of uses
• Durable polyester media is bacteria & chemical resistant
• Nominal 30-micron rating (R30) & nomimal 50-micron rating (R50)

WP Series Polypropylene String Wound Cartridges

• Manufactured from a durable polypropylene string that is wound around a rigid polypropylene core
• Premium String Wound solution to reduce fine sediment, including sand, slit, rust and scale particles
• Wound in a precise pattern around the core, providing greater surface area
• Suitable for a wide variety of sediment filtration applications, including municipal and well water as well as many industrial fluids

WP-BB-Series Polypropylene String Wound Cartridges

• Manufactured in 10" & 20" lengths and in 4.5" diameters from a durable polypropylene string that is wound around a rigid polypropylene core
• An economical solution to reduce fine sediment including rust, sand and scale particles
• Available in wide range of micron ratings

WPX-BB Series Polypropylene String Wound Cartridges

• Manufactured in 10" & 20" lengths and in 4.5" diameters from a durable polypropylene string that is wound around a rigid polypropylene core
• Fibrillated Polypropylene media wound in a precise pattern around the core, providing greater surface area to maintaining high flow rates
• Manufactured without any anti-static agent
• Bacteria & Chemical Resistant
• Recommended when foaming is an application issue

MaxClean.NSH® Polypropylene Melt-Blown Cartridges

• CPPM140 - Specialty Melt-Blown Polypropylene Cartridges, singed inner core surface & exterios treatment to prevent loose fiber migration
• Graded pore depth filter media type - No core lining required
• Exclusively designed for HPPC23A PP housings use

MegaClean.AST® Polypropylene Melt-Blown Cartridges

• CPPA60 - Absolute Melt-Blown Polypropylene Cartridges with graded pore structure generated by controlling micro fiber diameter variations
• Absoluted Rated Melt-Blown polypropylene Cartridges with 98% retention efficiency

CPPL68A & B Series Polypropylene Pleated Cartridges

• Sun-Central Polypropylene Pleated Cartridges are graded pore depth filters, made of FDA compliant pure pleated Polypropylene multi-layer media
• CPPL Cartridges are not affected by pressure drop fluctuations during operation, resulting in consistent high filter performance

C Series Dual Purpose Powdered-Activated Carbon Cartridges

• Economic solution for all of your general-purpose water filtration needs
• Provides sediment filtration and bad taste & odour and chlorine taste reduction
• High Dirt-Holding Capacity
• Available in wide range of sizes and two micron ratings
• Recommended for chlorinated water supplies

NCP Series Non-cellulose Carbon-Impregnated Pleated Cartridges

• Non-cellulose Media resists bacteria attacks
• Pleated for maximum dirt-loadng capacity
• Nominal 10-micron rating

GAC Series Granular Activated Carbon Cartridges

• Effective reduction of bad taste, odour and chlorine taste & odour
• Designed for maximum absorption
• Post-filter to reduce carbon fines
• Available in a variety of sizes and flow rates

CC Series Coconut Shell Granular Activated Carbon Cartridges

• Reduce unwanted chlorine taste & odour, and certain VOCs from potable drinking water
• Produces drinking water of exceptional taste & quality and provides better VOC reduction than standard GAC cartridges
• Available in a variety of sizes and flow rates

TSGAC Specialty Granular Activated Carbon/Phosphate Cartridge

• Phosphate Crystals reduce rust stains and scale deposits
• Designed for maximum absorption
• Post-filter to reduce carbon fines

EPM & EP Series Modified Epsilon Carbon-Briquette Cartridges

• High porosity maximizes utilization of the carbon block
• Greater chlorine taste & odour reduction capacity
• Nominal 10-micron & 5-micron rating

CBC Series Carbon Briquette Cartridges

• Reduces bad taste & odour, chlorine and certain VOCs from drinking water
• Effective at filtering Cryptosporidium and Giardia cyst
• High capacity chlorine reduction
• Nominal 0.5-micron rating

CBR2 Series Carbon Block Multi-Media Cartridges

• Advanced Multi-Media cartridges designed to reduce chlorine taste & odour and other contaminants
• Manufactured using a powdered activated carbon (PAC) with a specially designed adsorbent media, reducing exceeding 20,000 gallons
• Protected by a uniquely formulated polyolefin bilaminate prefilter, designed to significantly increase the useful life of the cartridge by trapping sediment that typically plugs carbon block cartridges
• Reduces particles as small as 0.5 micron
• CBR2-10R has a built-in flow restrictor (0.6 gpm) to allow for maximum contact time

RFC Series Radial Flow Carbon Cartridges

• Designed for High-Flow Applications with the Benefit of Reducing Carbon Fines
• Constructed with a 70-micron porous polyethylene outer shell & durable polypropylene end caps
• Unique Radial Flow Design offers the benefits of granular activated carbon (GAC) filtration, such as low pressure drop, while at the same time significantly reducing the release of carbon fines commonly associated with GAC-Style cartridges
• Available in wide variety of sizes

DFX Series Diamond Flow Cartridges

• Unique & premium Cartridge that utilizes several of the Pentair core competencies by merging technologies into one cartridge
• Effective chlorine taste & odour reduction found in traditional Pentair carbon blocks, joined with the superior sediment reduction to resist premature plugging
• Twice as resistant to particulate plugging than standard carbon blocks
• Available in 10" & 20" Lengths, 10 micron rating
• Available in Standard & Big Blue Size

RWSSC-5 Series PP Wound + GAC Carbon Cartridge

• Constructed entirely of FDA-approved material, the Pentair RWSSC-5 consists of Granular Activated Carbon (GAC) which are effective in the removal of tastes and odours from water and for the reduction of chlorine
• Ability to reduce organic compounds
• Large filtration of available filtration area is achieved by the creation of many fine pores and the channels in each of the carbon granules
• GAC is encased in an outer string wound material which can remove particulate to 5um
• Available in two different length, 9-3/4" & 10"

CFB-PLUS Series Modified Molded Block Cartridges

• Fibredyne's Carbon Block Technology offering up to two times the chlorine taste & odour reduction and dirt-holding capacity of traditional blocks
• Ideal choice for a wide range of residential, food service, commercial and industrial applications
• Nominal 5 - 10 micron rating

OAC Series Oil Absorbing Cartridges

• The proprietary filter media, which is using Pentair Fibredyne technology, chemically bonds with hyrocarbon
• Media can hold up to 340% of its own weight, with no release of removed hydrocarbons
• Instantaneous adsorption up to 95% of total hydrocabons removed in single pass
• Up to 8 times more efficency than GAC carbon filter cartridges
• High flow rates, low pressure drop

WS Series Water Softener Cartridges

• Manufactured with FDA grade softener resin
• Available in a variety of sizes for multiple applications
• Utilize single use resin technologies for maximum life grains (CaCo₃) capacity

PCF Series Mized Bed Ionization Cartridges

• Designed for deionizing water up to 16 megohms
• All materials & construction are FDA-compilant
• Available in 3 sizes, flow rates & capacities

Chloramine Reduction Carbon Cartridges

PCC Series Hexametaphosphate Crystal Cartridges

• Contain Hexmetaphosphate that dissolves slowly in water to inhibit scale and rust build-up
• Effective for treating scale, corrosion and iron problems for up to six months at various flow rates and feed concentrations
• Four unique designs to fit multiple applications
• Variety of Media Volumes and Flow Rates

RFFE10-BB, RFFE20-BB Radial Flow Iron Reduction Cartridges

• Designed to provide an easy and effective method of reducing dissolved iron from water, which greatly improves the taste
• Adds no harmful chemicals to the water, making it completely safe for drinking water applications
• Improves flavor and reduces the metallic taste caused by iron
• Reduces the possibility of pipe and water heater damage
• For Use in Pentair #10 & #20 Big Blue Filter Housings

Microguard Series Membrane Filter Cartridge - MG-10MCB

• Uniquely designed with integral carbon block and sediment pre-filtration for the reduction of chlorine taste & odour and for providing extended life of the internal membrane element
• Reduces particles as small as 0.15 micron in size by mechanical means
• Membrane filtration provides 99.9999% reduction of bacteria & virus by mechanical means
• Retains natural mineral content of water
• No electrical power required